ACR Electronics RCL-50 SEARCHLIGHT Specifikace stáhnout pdf (Strana 16)

Y1-03-0141 Rev. B

8.0 BULB REPLACEMENT

A quartz-halogen bulb is provided with your RCL-50B. If the bulb should need replacement, it

must be ordered through ACR Electronics, by P/N A1-14-0090-1 (12V units) or A1-14-0090-2

(24V units).

To replace the lamps:

1. Disconnect unit from power source and allow bulb to cool.

2. Remove three screws holding the front flange and glass in place.

3. To remove the old lamp bulb, grasp base of the lamp and pull straight out. DO NOT

TOUCH GLASS PARABOLIC REFLECTOR WITH FINGERS OR TOOLS!

4. Install the new lamp bulb using a soft clean cloth to avoid touching the bulb with your

fingers. Insert the lamp bulb pins into socket and press firmly in place.

NOTE: If the Lamp Bulb or Reflector are accidentally touched, carefully clean with

a soft rag and alcohol before continuing.

5. Replace the front flange and glass and install the three retaining screws. Be sure the

neoprene gasket is securely in place.

6. Reconnect the unit to the power source.

9.0 RCL-50B SEARCHLIGHT COMPONENTS

PRODUCT NO. 1939.3 - RCL-50B 12 V Searchlight Installation Kit includes:

Description Quantity ACR Part Number

Searchlight, RCL-50B, 12 V 1 A3-06-0092-3

Kit, Nylon Washers (4) 1 A3-06-1940

Connector, “F” 2 A1-03-0220

Cable, Coaxial 15' A2-07-0002-6

Master Controller, URC-102 1 A3-06-2231

Connector, "In-Line" 8 A1-03-0222

Point Pad™, URP-102 with

Surface Mount Case 1 A3-06-2230

Case, Flush Mount 1 A1-18-1875-2

Gasket, Surface Mount 1 A1-25-0140-1

Gasket, Flush Mount 1 A1-25-0140-2

U Clamp 2 A1-17-1366

Nuts, Nylon-lock 2 A1-05-0776

Washers 2 A1-05-0777

Warranty Card 1 A1-20-1019

Product Support Manual 1 Y1-03-0141

Mounting Templates 1 Y1-03-0138-1

1 2 ... 11 12 13 14 15 16 17 18 19

Žádné komentáře

ACR Electronics RCL-50 SEARCHLIGHT Specifikace Strana 16